Frequently Asked Questions

  • A solid level base will be required.
  • Adequate ventilation for the refrigeration system ( if a packaged unit is required – please refer to the Refrigeration Guidelines ).
  • Power provision ( we haven’t invented wirelessly powered coldrooms as yet ! ).
  • Ambient conditions – ( in particular the air temperature in the area ).

A standard range of coldrooms in set sizes is available. Please see the Iceberg Coldroom Range.

We also offer a bespoke coldrooms that can be manufactured to almost any size.

A standard height could be considered as 2.3m external, however we can supply coldrooms to almost any height to suit your requirements.

Our Iceberg Coldroom Range has an external height of 2.2m.

Yes!

Freezer coldstores must have an insulated floor.

Chiller temperature rooms can either be floored or floorless.

Please refer to the FAQ section on Frost Heave / Heater Mats.

We can supply packaged refrigeration units (monoblock) on smaller coldrooms, and we work with refrigeration specialists throughout the UK which we can refer you to if a remote refrigeration system is required.

However – we are not refrigeration contractors, and do not have refrigeration service engineers.

If a remote refrigeration system is required we can subcontract the works out or we can provide you with details of recommended refrigeration specialists in your area.

Please refer to our Refrigeration Guidelines section for more information.

Obviously there is a requirement for a local power supply to all coldrooms.

If you are interested in the coldroom only and you have a refrigeration specialist working with you, then you should refer to your refrigeration specialist for advice on the electrical requirements.

If you are interested in the packaged refrigeration units (monoblock), then we can offer to connect and commission the units. This will be specified as an option on your quotation.

We do on occasion have a quantity of non-prime panels available, or stock surplus to requirement ( due to layout changes etc ).

Please contact our Sales Department.

Yes – we can dismantle and dispose of old rooms.

To provide a quotation we would need to know the size of the coldroom, if it has an insulated floor, if it’s a chiller or a freezer, the location and condition of the existing items.

We offer repair / refurbishment works on any manufacturers coldrooms, from gasket replacements, replacement handles, replacement doors to panel repairs, or even coldroom extensions.

Please refer to our Service and Maintenance department Servacool for more information.

Yes, we will happily arrange for one of our Area Managers to meetup with you on site to measure up and to discuss your requirements.

Please contact our Sales Department

Yes.

Our custom coldrooms are available in weatherproof finishes, with a weatherproof roof also. We would recommend discussing your requirement with one of our Area Managers who can assist and advise on what we would recommend.

Heater mats are designed to prevent the subfloor from dropping below 0°c.

Frost heave is caused when the subfloor temperature drops below 0°c. This can cause significant ice formation in the subfloor over time.

The effects of such formations can be severe.

We recommend that any ground floor situated freezer room over 9m2 (e.g. 3m x 3m) be fitted with a heater mat to prevent this from occurring.

If you have any queries not mentioned above, please contact us using the form below.